Single Layer Transmit-array with Beam-Steering and Polarization Switching
In this paper,a single layer multi-polarization transmit-array operating at C-Band is designed using ring groove with a single split as the element.The rotational orientation of each element can provide the required phase shift.The elements have identical dimensions,but the rotational orientation of each element is selected to provide a specific transmit-array function.The transmit-array has three working conditions which can change the polarization of the incident wave and set separation beam direction at the same time.The thin single-layer transmit-array without dielectric substrate is designed,simulated and measured based on a horn antenna.The measurement result shows that the transmit-array can switch the linear polarization incident wave to left-circularly polarized wave and right-handed circular polarized wave with separation beam of±30 azimuth angles separately.The measured results are in agreement with the theoretical and simulation results.
Beam steering phase modulation polarization switching transmit-arrays
Xiaochun Liu Qiming Yu Xiangkun Kong Zhengyu Huang Borui Bian Shaobin Liu Jixuan Liu
College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics
国际会议
深圳
英文
56-62
2021-12-01(万方平台首次上网日期,不代表论文的发表时间)