会议专题

Highly conductive,flexible PU/PANI based conductive adhesives for flexible electronics

  Composite matrix material based on polyurethane(PU)and polyaniline(PANI)were synthesized via a simple process.The composite material and the silver flakes were used as matrix and filler,respectively.Resistivity can be achieved as low as 3.8×10-5 Ω·cm at 70 wt.%loadings,suggesting good conductive properties.The conductivity of the electrical conductive adhesive sample was basically unchanged after 400 cycles of bending and 1000 cycles of twisting.The flexible electrical conductive adhesives(FECAs)possess not only good mechanical properties but superior electrical conductivity with good stability even under bending.These superior material properties combined with excellent performance and simple processing make it very promising for emerging flexible electronics.

matrix electrical conductive adhesives flexible electronics

Shaocun Yan Hongru Ma Zhe Li Yanqing Ma Lei Ma

Tianjin International Center for Nanoparticles and Nanosystems,Tianjin University,Tianjin,300072,P.R Tianjin International Center for Nanoparticles and Nanosystems,Tianjin University,Tianjin,300072,P.R School of Precision Instrument & Opto-Electronics Engineering,Tianjin University,Tianjin,300072,P.R. Tianjin International Center for Nanoparticles and Nanosystems,Tianjin University,Tianjin,300072,P.R

国际会议

第十九届国际电子封装技术会议(ICEPT 2018)

上海

英文

1305-1308

2018-08-08(万方平台首次上网日期,不代表论文的发表时间)