会议专题

A MEMS-based Double-layer Spiral Planar Inductor using Patterned Permalloy filled with Ferrite/Polyimide Composite Materials as Magnetic Layers

  A MEMS-based planar inductor with double-layer spiral coil structure is developed in this study.The patterned permalloy which blank are filled with MnZn ferrite/PI composite materials is used as the magnetic layer of the inductor as well as the magnetic shielding layers.The double-layer planar inductor has a size of 1.5×1.5×0.15mm consisted of 13-turn spiral Cu coil for each layer and a 20-μm-thick patterned permalloy magnetic layers filled with MnZn ferrite/PI composite materials above and below.The inductor shows a higher inductance than the traditional planar inductor.The patterned permalloy made the inductor more stable in high frequency than the none-patterned.And the filling MnZn ferrite/PI composite materials made the inductor to achieve more excellent insulation and lower dissipation characteristics.And the inductor has an inductance of 1.3μH and quality factor of 2.8 at 1.5MHz.

Permalloy MnZn ferrite Planar inductor Double layers Magnetic shielding Patterned permalloy MnZn/PI composite materials

Xiaomin Zhu Ping Cheng Mingming Chen Guifu Ding

National Key Laboratory of Science and Technology on Micro/Nano Fabrication,Department of Micro/Nano Electronics,School of Electronic Information and Electrical Engineering,Shanghai Jiao Tong University,Shanghai 200240,CHINA

国际会议

2019 International Conference on Civil Engineering, Materials and Environment (ICCEME 2019)(2019国际土木工程、材料与环境会议)

长春

英文

124-130

2019-10-11(万方平台首次上网日期,不代表论文的发表时间)