Design of Baby Diaper Cleaner
The baby diaper cleaning machine includes a sink at the bottom,a washing table mounted on the top of the sink,and a washing table fixed together with the top cover; The drain valve is installed outside of the tank,and the diaper support frame is installed inside of the sink.The diaper is clamped through the diaper support frame and the diaper support frame clamping ring.The brush board is mounted on the scrub table.Both ends of the brush plate are placed in the first card slot inside the scrub table.The upper surface of the brush plate is fixed at the left end of the bearing and the connecting rod.The right end of the connecting rod is connected to the left end of the connecting rod through the bearing.The right end of the connecting rod is connected to the eccentric gear through the bearing.The pinion meshes externally with the eccentric gear,and the pinion is fixed on the output shaft of the motor; The handle is fixed on the upper surface of the upper cover,and the disinfectant lamp and battery box are installed on the lower surface of the upper cover.This product can not only obtain better washing effect,but also sterilize the diaper after washing.This product has the advantages of simple structure,saving water,electricity and other resources,green and environmental protection.
Cleaning machine Diapers Baby Scrub table Support frame
Miao Shang Xinlin He Wenming Ma
Mechanical and Electrical Technology,Xijing University,Xian,China
国际会议
太原
英文
99-103
2019-06-29（万方平台首次上网日期，不代表论文的发表时间）