会议专题

Mechanical properties and oxidation resistance of ZrB2-SiC-MoSi2 ceramic prepared by spark plasma sintering

  ZrB2-30vol.%SiC-10vol.%MoSi2 ceramic with high relative density were fabricated by spark plasma sintering method(SPS).The comprehensive performances,including microstructure,mechanical properties,oxidation resistance,were evaluated.MoB phase was formed during sintering,therefore,the interphase bonding forces among different phases were significantly enhanced.The fracture toughness,hardness and bending strength were 5.73 MPa·m1/2,16.1 GPa and 428 MPa,respectively.By oxidation at 1500 ℃ for 10 h,the mass gain was about 14.42 mg/cm2,the oxidation depth was about 298 μm.

Qi Li Lamei Cao

Science and Technology on Advanced High Temperature Structural Materials Laboratory,Beijing Institute of Aeronautical Materials,Beijing 100095,China

国际会议

2017 International Symposium on Application of Materials Science and Energy Materials (SAMSE 2017) (2017材料科学应用与能源材料国际研讨会)

上海

英文

1-5

2017-12-28(万方平台首次上网日期,不代表论文的发表时间)