Effect of Lay-Up Sequence on the Flexural Properties of CFRP Laminates

摘要：

　　In the current studies, the flexural behavior of carbon fiber reinforced polymer laminates was investigated experimentally.The CFRP laminates were fabricated using unidirectional prepreg molding process.Three-point bending test were performed using a material testing system.The present results showed that the flexural strength and modulus of laminates were strongly dependent on the lay-up sequence of the fiber reinforcement.The ply stacking sequence 0°exhibited best flexural properties than others.The flexural failure of CFRP was initiated that the upside of the CFRP suffers compression failure and the lower surface suffers tension failures.

关键词： Lay-up sequence Flexural behavior Failure mode Molding process Prepreg

作者: Lyutao Zhu Chengyan Zhu

作者单位: College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou, 310018, China;Key Laborat College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou, 310018, China

会议类型: 国际会议

会议名称: 2018 Sino-Africa International Symposium on Textiles and Apparel (SAISTA2018)(2018中非纺织服装国际论坛)

会议地点: 巴赫达尔

会议语种:英文

页码: 246-251

在线出版日期: 2018-09-15（万方平台首次上网日期，不代表论文的发表时间）