Filament Metal Printing:Sintered Metal Parts Based on FFF with Reinforced Feedstock

摘要：

　　Some say,it is 20x faster than powder bed laser melting.Filament Metal Printing is an extrusion based technology using fused filament fabrication(FFF)with a metal powder filled feedstock to additively create green parts.In this study we used the commercially available Ultrafuse 316LX filament to investigate the potential,tolerances and the limits of this technology.We also give a comparison between different 3D printers using this raw material.Innovative Aspects of this research work we see ina systematic research and analysis on printing Ultrafuse 316LX.Debinding and sintering effects,challenges and design rules forfunctional parts will follow.

作者: Kitzmantel Michael Kaltenbrunner Markus Doppler Michael Wilfinger Thomas Kapaun Wolfgang Neubauer Erich

作者单位: RHP-Technology GmbH,Forschungszentrum,2444 Seibersdorf,Austria;Vienna University of Technology,Karls Evo-Tech GmbH,Gahberggasse 9a,4861 Sch(o)rfling am Attersee,Austria RHP-Technology GmbH,Forschungszentrum,2444 Seibersdorf,Austria

会议类型: 国际会议

会议名称: 2018世界粉末冶金大会

会议地点: 北京

会议语种:英文

页码: 1650-1655

在线出版日期: 2018-09-16（万方平台首次上网日期，不代表论文的发表时间）