EFFECT OF FABRICATION PARAMETERS AND MATERIAL FEATURES ON DIMENSIONAL ACCURACY OF FDM BUILD PARTS
This paper presents experimental investigations on influence of fabrication parameters viz.,layer resolution,processing quality,fill mode and the processing material on dimensional accuracy of fused deposition modelling(FDM).The test specimen is designed and the levels of each factor are setup.Then Taguchis parameter design is applied to find optimum parameters setting to minimize percentage change in direction of X,Y and Z of test specimen.As the percentages changes are obtained,the signal to noise ratio is defined to evaluate the influence and variation.Then main effect plot is drawn to find optimal level of fabrication parameters.The results indicate that optimal factor settings for each performance characteristic are different.Therefore,analysis of variance is performed to calculate the significance level of experiment factors affecting to the dimensional accuracy in each direction.Finally,the effect of fabrication parameters and material features on dimensional accuracy of FDM build parts is obtained.
Fused Deposition Modelling Dimensional Accuracy Taguchis Parameter Design Main Effect Plot Analysis of Variance
Zhenhui Shen Haiyan Hua Shuanqiang Yang Yangmei Zhang
Engineering College,Fujian Jiangxia University,University Town,Fuzhou,P.R.China School of Mechanical and Automotive Engineering,Fujian University of Technology,University Town,Fuzh
国际会议
吉林
英文
226-229
2018-06-23（万方平台首次上网日期，不代表论文的发表时间）