Research on the Quasi Maintaining-voltage Phenomenon of RC-type Generator in Micro-EDM

摘要：

　　In micro electrical discharge machining(micro-EDM),RC-type generator is popular because of the short pulse duration with low pulse energy.According to the experimental waveforms captured in micro-EDM processing with a commercial RC-type generator,the gap voltage had a relatively slow slope rate section during the discharge period,so a quasi maintaining-voltage assumption was proposed.Then,an electrical circuit model,considering the parasitic parameters,was established and the discharge process was analyzed theoretically.The effects of the parasitic parameters on the discharge waveforms were analyzed by calculation and electrical simulation.The calculated waveforms and simulation results,matching the experimental waveforms well,supported the validation of the proposed electrical circuit model,and the model can be easily used for discharge duration prediction in micro-EDM.

关键词： Micro electrical discharge machining (micro-EDM) RC-type generator maintaining-voltage electrical circuit model electrical simulation

作者: Hua Han Yang Fei Yang Jiao Shi Kun Peng Fuming

作者单位: School of Automation,Nanjing University of Science & Technology,No.200 Xiaolingwei Street,Nanjing,China

会议类型: 国际会议

会议名称: 第十七届国际制造会议(The 17th International Manufacturing Conference in China)(IMCC 2017))

会议地点: 深圳

会议语种:英文

页码: 1-7

在线出版日期: 2017-11-23（万方平台首次上网日期，不代表论文的发表时间）