Analysis of cutting forces in high speed ball milling of natural marble

摘要：

　　In this study,high speed milling of natural marble were conducted with coated carbide ball mill under a wide range of cutting conditions.The effects of cutting speed and feed rate on the cutting forces in three directions were investigated.It was found that there is no obvious difference for the cutting forces in three direcitons,and the cutting forces decrease with the increase of cutting speed and increase with the feed rate.When the spindle speed increases to 4000r/min,the spindle speed and feed rate show an limited effects on the cutting forces,so high cutting speed and feed rate are recomended in milling of natural marble considering production efficiency.

关键词： Cutting forces Natural marble High-speed milling

作者: Cao Liang Jiang Feng Wang Fuzeng Liao Tongkai

作者单位: Institute of Manufacturing Engineering,Huaqiao University,Xiamen 361021,China

会议类型: 国际会议

会议名称: 第十七届国际制造会议(The 17th International Manufacturing Conference in China)(IMCC 2017))

会议地点: 深圳

会议语种:英文

页码: 1-5

在线出版日期: 2017-11-23（万方平台首次上网日期，不代表论文的发表时间）