Experimental investigation of grindability of equiaxed Nickel-based superalloy K4125

摘要：

　　Nickel-based superalloy is a typical hard-to-machining material in aero-engine manufacturing industry.The grindability of equiaxed cast nickel-based superalloy K4125 is discussed in this article.The effect of grinding parameters(e.g.,grinding speed,workpiece speed and depth of cut)on the grinding force,specific energy,grinding temperature and workpiece surface quality is analyzed.The results show that the grinding force and specific energy of K4125 superalloy are usually great; the grinding temperature of K4125 superalloy is above 400℃.Moreover,the wheel wear during grinding K4125 is also severe and ground surface roughness is high.Finally,the recommended grinding parameters of machining K4125 superalloy by brown corundum wheel is given which is grinding speed of 25-30m/s,workpiece speed of 500-1000mm/min,depth of cut of 0.01-0.02mm.

关键词： Grinding Nickel-based superally grindability surface quality

作者: Qian Ning Xu Jiuhua Zhu Yejun Ding Wenfeng

作者单位: College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,PR China

会议类型: 国际会议

会议名称: 第十七届国际制造会议(The 17th International Manufacturing Conference in China)(IMCC 2017))

会议地点: 深圳

会议语种:英文

页码: 1-7

在线出版日期: 2017-11-23（万方平台首次上网日期，不代表论文的发表时间）