PREPARATION AND PHSICAL PROPERTIES OF MUCK BASED CERAMICS FOR 700-900 DENSITY LEVELS

摘要：

　　To determine the optimum firing process,the influence of raw material,calcination temperature and mixing ratio on the packing density of muck based ceramics was studied.And then the apparent density,cylinder pressure,water absorption,loss and other physical properties were tested.The results show that: muck based ceramics for 700-900 density levels could be produced when the content of fly ash is 70%-83%and the content of fly ash is 17%-30%,the calcination temperature is 1170℃-1200℃,which is light brown with smooth surface and intact enamel layer,and the interior is loose and porous.

关键词： muck ceramics optimum firing process fly ash

作者: Teng-fei Zhang Hui Rong Zhi-hua Liu Zhi-feng Liu Lei Zhang Hai-liang Wang

作者单位: School of Materials Science and Engineering,TianJin ChengJian University,Tianjin 300384,China School of Civil Engineering,TianJin ChengJian University,Tianjin,300384

会议类型: 国际会议

会议名称: 2016 International Symposium on Civil and Environmental Engineering(2016年土木与环境工程国际研讨会)

会议地点: 武汉

会议语种:英文

页码: 92-97

在线出版日期: 2016-12-20（万方平台首次上网日期，不代表论文的发表时间）