Study on Continuous Annealing Process and Properties of 1180MPa Grade Cold Rolled and Hot Dip Galvanized Dual Phase Steel
This paper dealt with continuous annealing process and mechanical property of a 1180MPa grade cold rolled and hot-dip galvanized dual-phase steel.The effects of process parameters,including annealing temperature and time as well as galvanizing temperature on microstructure and mechanical property of the steel were investigated.It was found that the annealing temperature has the most important effect on mechanical property of the steel.With the increase of annealing temperature,the tensile strength (TS) decreased first and then increased,but the effect of yield strength (YS) and elongation is not obvious,and the annealing time has no significant effect.In addition,YS and TS can be enhanced by increasing galvanizing temperature.
dual phase steel hot-dip galvanized continuous annealing microstructure and mechanical property
ZHANG Hong ZHOU Shu
Research institute, Baoshan Iron and Steel Co., Ltd, Shanghai 201900, China;State Key Laboratory of Development and Application Technology of Automotive Steels,Shanghai 201900, China
国际会议
成都
英文
487-490
2016-11-16（万方平台首次上网日期，不代表论文的发表时间）