会议专题

The Impact of Fused Mullite-zirconia on Thermal Shock Resistance of Al2O3-Cr203 Refractories

  Al2O3-Cr2O3 refractory (Cr2O3, 10%wt) samples with adding 10wt% fused mullite-zirconia particles were prepared.As a comparison, samples with adding 3% wt.of m-ZrO2 and samples without addition were prepared.respectively.Those samples were investigated by water cold thermal shock test (11 00 ℃)and simulating open paring thermal shock test (1600 ℃) to research the impact of fused mullite-zirconia added on thermal shock resistance of Al2O3-Cr2O3 refractories.The results indicate that mullite-zirconia particles can significantly improve the thermal shock resistance of Al2O3-Cr2O3 refractories.The improvement effect of the thermal shock resistance by introducing mullite-zirconia particles is quite as introducing m-ZrO2.During sintering, glassy phase in mullite-zirconia particles melt and infiltrate into matrix, which causes the surrounding matrix and mullite-zirconia particles to combine closely.Mullite-zirconia particles in Al2O3-Cr2O3 refractory have an effect of buffer and absorption to thermal shock cracks, due to its eutectic and cracks structure.

Al2O3-Cr2O3 refractories fused mullite-zirconia thermal shock resistance

LI Pengtao SUN Honggang LI Jianqiang YAN Shuangzhi WANG Gang

State Key Laboratory of Advanced Refractories,Sinosteel Luoyang Institute of Refractories Research Co.,Ltd.,Luoyang 471039,China

国际会议

第七届国际耐火材料学术会议(ISR2016)

西安

英文

1-6

2016-09-20(万方平台首次上网日期,不代表论文的发表时间)