A Comparative Study on the Wear and Corrosion Resistance of Coatings
The vessel containing sulfur particles has been found failing due to the effect of corrosion and erosion by the sulfur particles.Several coatings,including zinc-aluminum coating,wearresistance painting and two kinds of polymer,have been provided to resist the negative influence of sulfur in the present study.The wear and corrosion resistance of the selected coatings has been measured to study the performance difference.Impact test has also been done to investigate the bonding condition of coatings under the impact or bending load.The microstructure of coatings before and after wear test is observed by the Optical Microscope (OM) and Scanning Electron Microscope (SEM).The experiment results reveal that one of the polymer coatings shows the best performance in the corrosion resistance,another polymer coating’s wear resistance is better than others.The coatings are bonded well with the substrate except the zinc-aluminum coating.The performance of painting is ordinary in this investigation.
coating sulfur corrosion wear
Cheng-Zhou Chen Wei-Ze Wang Kai-Di Cheng
Key Laboratory of Pressure System and Safety,Ministry of Education,East China University of Science and Technology,Shanghai 200237,China
国际会议
2016 International Symposium on Structural Integrity，ISSI—2016(2016国际结构完整性研讨会)
天津
英文
441-445
2016-05-26（万方平台首次上网日期，不代表论文的发表时间）