Design of Space Charge Density Measuring Device Based on Air Filtration Methods
To measure space charge density around UHVDC transmission lines,a measuring device is developed based on air filtration methods.The device,which uses STM32 microcontroller as the core controller,collects charged particles in the air by adsorption material.Through the charge to voltage converting circuit,charges absorbed are transferred into a voltage signal and are collected by microcontroller.Space charge density in the region is calculated combining the air flow measured by hot-wire anemometer.To reduce the measurement error,the equivalent circuit model of air filtration methods is analyzed.The source of error is analyzed and methods to reduce error are obtained.The device is used in ultra high voltage DC test base to measure the space charge density under UHVDC transmission lines.The results show that there are similar tendency compared with the theoretical value of bipolar transmission lines.The feasibility and availability of the device is verified.
Air Filtration Methods Space Charge Density UHVDC STM32
Zhang Yuekui Guo Xin Wang Lulin Liu Yingyi Yuan Haiwen
School of Automation Science and Electrical Engineering Beihang University Beijing, China
国际会议
秦皇岛
英文
161-166
2015-09-18（万方平台首次上网日期，不代表论文的发表时间）