An Investigation of Forces and Tool Wear in Milling of Ni3Al-base Superalloy

摘要：

　　This article studies the forces and tool wear behavior in the milling process of Ni3Al-base superalloys with cemented carbide cutting tools.The effects of cutting parameters on the machinability of these superalloys are experimentally discussed.The results indicate that the forces increase with the increase of the axial depth of cut, the radial depth of cut and the feedrate per tooth.The cutting tools wear rapidly in the milling process of Ni/Al superalloys.The cemented carbide cutting tool with TX coating is more suitable for machining Ni/Al superalloys when compared with the tool with TiCN coating.

关键词： Superalloy Milling Machinability Ni3Al-base

作者: Gaoqun Liu Zhengcai Zhao Yucan Fu Zhiliang Yan

作者单位: College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics

会议类型: 国际会议

会议名称: The 12th Asia-Pacific Conference on Materials Processing(APCMP2016)(第12届亚太材料加工会议)

会议地点: 青岛

会议语种:英文

页码: 32-37

在线出版日期: 2016-06-16（万方平台首次上网日期，不代表论文的发表时间）