会议专题

Preparation of MgB2 Films by Directly Electrophoretic Depositing MgB2 Powder on Ti Substrates

  MgB2 powder was fabricated by sintering the mixture of pure Mg and B powder with atomic ratio of Mg: B=l∶2.The magnetic property of the powder indicated that it was superconducting and its critical transition temperature was 39K.Titanium based MgB2 films were obtained by electrophoretic deposition method using Ni sheet as anode and titanium tapes as cathode.The films were annealed at 500℃ for 2 hours, subjected to argon-hydrogen (95%Ar+5%H2) gas flow.The results of X-ray diffraction (XRD) analysis showed that the composition of the film was mainly MgB2.The observation under scanning electron microscopy (SEM) showed that the film of MgB2 was uniform and dense.The electrical resistivity of double-side MgB2 film was about 5.280× 10-8Ω/m.

Superconductors MgB2 Electrophoretic deposition Coatings Electrical resistivity

Fenghua Li Han Gao Bowen Zhang Qinglian Zhu

School of Metallurgy, Northeastern University, Shenyang 110819, China School of Materials science and Engineering, Northeastern University, Shenyang 110819, China

国际会议

The 12th Asia-Pacific Conference on Materials Processing(APCMP2016)(第12届亚太材料加工会议)

青岛

英文

270-276

2016-06-16(万方平台首次上网日期,不代表论文的发表时间)