Study on underwater connector temperature and pressure testing technology
the paper has researched the relevant authority standards of domestic and international such as ISO 10423, ISO 13628, API SEPC 17D, ISO 13679, ISO 21329, API Spec 6A, then determined the designed parameters of the temperature pressure test connector. And, the test device was designed according to the test requirement. The device is consist of heating unit, cooling unit and insulation unit. Finally, select heating the oil tank as the heating method, vaporization of the liquid nitrogen as the cooling methods, insulation materials and temperature compensation as the heat maintaining method. Ansys simulation was performed for the testing procedure. Reliable temperature gradient of the testing was obtained. At last, some suggestion was presented for the temperature control difficulty in the testing.
underwater connector test standard temperature and pressure test device finite element analysis
Jun Liu Yuchen Wang Baoshuang Shi Daoming Wang Liquan Wang Xiangjuan Xu
Harbin Engineering University, Harbin, China OFFSHORE OIL ENGINEERING CO.LTD, Tianjin, China
国际会议
重庆
英文
853-862
2015-12-18（万方平台首次上网日期，不代表论文的发表时间）