会议专题

Development and Metallurgical Characteristics Research of Flat Single Snorkel Vacuum Degasser

  The flat single snorkel vacuum degasser developed in this paper is based on single round snorkel degasser which was invented by Zhangjian in 1970’s.The flat single snorkel limits bottom blowing gas swing and form stable bubbles floating path to keep wider liquid steel exposed surface,and the far eccentricity bottom blowing make wider circular path to increase decarburization rate.Water model shows that the mixing time decreases while the bottom blowing flow increase,and with the eccentricity distance increase,the mixing time initially decreases and then increases,the optimum bottom blowing point is on half axis radius.The industrial test indicate that the decarburization rate of flat single snorkel vacuum can match RH,the end carbon is less than 30×10-6,the average desulfurization rate is two times higher than RH.The ULC and ULS steel can be produced using flat single snorkel vacuum degasser.

flat single snorkel vacuum degasser ULC ULS development

Chang SHEN Liping WU Yuanwang PAN Yuchang HU Shaoming PU Yangguo XIE

Manshan Iron and Steel Co. Ltd.,Manshan,243000,China;Anhui Province Key Laboratory of High-perform Maanshan Iron and Steel Co. Ltd.,Maanshan,243000,China

国际会议

the 6th International Congress on the Science and Technology of Steelmaking,ICS2015(第六届国际炼钢科技大会)

北京

英文

378-380

2015-05-12(万方平台首次上网日期,不代表论文的发表时间)