Microstructure and Wear Properties of Ni-W-Si Coatings by Laser Cladding
Ni-W-Si intermetallic composite coatings consisting of primary tungsten dendrites and eutectic W/WSi2 were fabricated on 45 steel by laser cladding process using Ni-W-Si powers.The microstructure and composition of the coatings was characterized by SEM, XRD and EDS.The effect of the W content on the hardness and wear resistance of coatings was investigated.Results indicate that attributed to the high hardness and toughness of tungsten dendrites and fine and compact eutectic W/WSi2, coatings had high hardness (the highest being 950HV) and the wear resistance was elevated to 4~8 times higher.
Coating Laser cladding,Microhardness,Microstructure
Xiaopeng Liu Peilei Zhang Hua Yan Yunlong Lu Zhishui Yu Chonggui Li Qinghua Lu
School of Materials Engineering,Shanghai University of Engineering Science,Shanghai 201620,China;Research & Development Center for Key Technologies of Intelligent Equipments of Ultra-Intense Laser Processing,Shanghai 201620,China
国际会议
2014 International Symposium on Structural Integrity,ISSI2014(2014国际结构完整性学术会议)
兰州
英文
421-426
2014-08-20(万方平台首次上网日期,不代表论文的发表时间)