会议专题

Research on tensile property and creep resistance of electroplating nickel reinforced by A12O3 nanoparticles

  In this work,the tensile property and creep behavior of electrodeposited nanostructure A12O3-M composite coatings have been investigated.The nanocomposite coatings were produced by composite electrodeposition technique in a nickel sulphamate bath containing suspended nano-sized A12O3 particles.The structure of the obtained coatings was characterized by scanning electron microscopy(SEM),and the A12O3 content was analyzed from quantitative energy dispersive X-ray spectrometry(EDX).It has been found that the existence of A12O3 particles disturbed the law of nickel deposition and decreased the grain size of nickel film.The tensile test showed an apparent increase in the strength of composite nickel coatings as compared with that of pure nickel coatings.Also the steady state creep rate of the composite nickel is lower than that of the pure nickel,which illustrated that the creep resistance was improved by adding A12O3 nanoparticles as the dispersion strengthened second-phase.

electroplating nickel Al2O3 nanoparticles tensile property creep resistance

Chunjin Hang Yanhang Tian Chunqing Wang Hong Wang

State Key Laboratory of Advanced Welding and Joining Harbin Institute of Technology Harbin,China CAST-Xian Institute of Space Radio Technology Xian,China

国际会议

The 15th International Conference on Electronic Packaging Technology (ICEPT 2014) ) (第十五届电子封装技术国际会议)

成都

英文

476-479

2014-08-12(万方平台首次上网日期,不代表论文的发表时间)