会议专题

Application of Nano Copper Conductive Ink for Printed Electronics

  The main objective of this paper is to investigate the reliability of applying nano copper conductive ink in preparing RFID inlay.We employed anti-oxidation nano copper particles to prepare the conductive ink and used UV(Ultraviolet)light curing technique to form the conductive pattern of RFID passive antenna on polyimide(PI)film.The adhesion of the nano copper conductive ink on PI film was checked by cross cut tape test and the results showed 100%area of ink remaining on film.Thickness and conductivity of the printed antenna were evaluated by optic microscope and four probe method.The reading distance of RFID inlay can reach 3 meters measured by a UHF RFID reader,which is sufficient to meet the demand for most RFID applications.These results have proven that nano copper conductive ink has a potential for RFID application.

nano copper printed electronics RFID

Yating Hu Bing An Chenxu Niu Weiwen Lv Yiping Wu

School of Materials Science and Engineering Huazhong University of Science and Technology Wuhan,China

国际会议

The 15th International Conference on Electronic Packaging Technology (ICEPT 2014) ) (第十五届电子封装技术国际会议)

成都

英文

1565-1567

2014-08-12(万方平台首次上网日期,不代表论文的发表时间)