The Application of Particle Swarm Optimization Arithmetic in Propeller Design
In order to obtain a propeller with good efficiency and cavitation performance, the propeller sections were optimization designed using particle swarm optimization (PSO) method.An interactive calculation method was used in design process for the circulation distribution of designed propeller was not coincident with optimization circulation.The difference of circulation was de fined as correction factor to adjust lift coefficients of sections.PSO method was used to optimize sections to improve the lift-to-drag ratio and pressure distribu tion.The convergence condition was the circulation distribution fulfilled opti mum circulation distribution form.A MAU propeller was optimized using the method.Hydrodynamic performances of propeller and sections pressure dis tribution of original propeller were compared with optimized propeller.It indi cates from the results that compared with traditional method, the PSO method is simpler in theory and cost less computing time.The open water efficiency of optimized propeller advanced obviously.The min negative pressure is smaller which means the cavitation performance is better.
PSO Propeller Optimization design Panel method Open water efficiency
Chao Wang Guoliang Wang Wanlong Ren Chunyu Guo Bin Zhou
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China ;College of College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China China Ship Scientific Research Center, Wuxi 214082, China
国际会议
4th international Conference,ICSI2013(第4届群体智能国际会议)
哈尔滨
英文
218-224
2013-06-12(万方平台首次上网日期,不代表论文的发表时间)