会议专题

Influence of Calcined Temperature on the Piezoelectric Properties of (Na0.48K0.47Li0.05)NbO3 Lead-free Piezoelectric Ceramics Doped with CuO

  (Na0.48K0.47Li0.05)NbO3 (NKLN) Lead-free piezoelectric ceramics doped with CuO were prepared by traditional solid-state reaction method.Influence of calcined temperature on the material phase of NKLN lead-free piezoelectric ceramics doped with CuO by X-ray diffraction(XRD) and the influence of calcined temperature and sintered temperature on the properties of NKLN lead-free piezoelectric ceramics doped with CuO by others analysis method.The results show that the best calcined temperature is got,when calcined temperature is up to 850 ℃,the mixed phase disappeares,a single phase perovskites structure is formed.With the increase of calcined temperature,piezoelectric strain constant (d33)、planar electromechanical coupling factor (Kp) of NKLN lead-free piezoelectric ceramics increase first and then decrease,while only dielectric loss (tanδ) decreases first and then increases.The best calcined temperature is 850 ℃,the best sintered temperature is 1080 ℃,the NKLN lead-free piezoelectric ceramics doped with CuO with good comprehensive properties are obtained,whose d33,Kp,tans are 85 pC/N,0.3,0.038,respectively.

lead-free piezoelectric ceramics lithium sodium potassium niobate calcined temperature CuO doped

Xinyou Huang Musheng Huang Chunhua Gao

School of Materials Science and Engineering,Jiangsu University,Zhenjiang 212013,China;Jiangsu Provin School of Materials Science and Engineering,Jiangsu University,Zhenjiang 212013,China

国际会议

2013 2nd international Conference on Opto-Electronics Engineering and Materials Eesearch(2013第二届光电工程与材料研究国际会议)(OEMR2013)

郑州

英文

40-43

2013-10-19(万方平台首次上网日期,不代表论文的发表时间)