会议专题

Low Voltage Low Power Up-Conversion Mixer for Wireless Sensor Networks Node Application

  A low voltage,low power up-conversion mixer is presented here for 2.4GHz wireless sensor networks (WSN).It was based on a double-balanced Gilbert cell type.The current-reuse technique was used to reduce the power consumption and negative-resistance compensation technique was used to improve the conversion gain.The mixer was designed in 0.18μm RF CMOS technology,and was simulated with Cadence SpectreRF.The simulation results indicate that the conversion gain is 6.37dB,the noise figure is 15.36dB and the input 1dB compression point is -10.3dBm,while consuming 1mA current for operating voltage at 1V.

Mixer Current-reuse Low voltage Low power

Ge Sun Zhiqun Li Chenjian Wu Meng Zhang Jia Cao Zengqi Wang

Institute of RF-&OE-ICs,Southeast University,Nanjing,China,210096;School of Integrated Circuit,South Institute of RF-&OE-ICs,Southeast University,Nanjing,China,210096;Key Laboratory of Jiangsu Province

国际会议

2013 2nd international Conference on Opto-Electronics Engineering and Materials Eesearch(2013第二届光电工程与材料研究国际会议)(OEMR2013)

郑州

英文

218-222

2013-10-19(万方平台首次上网日期,不代表论文的发表时间)