Ultraprecision Lapping for the Zirconia ceramic Plane
Zirconia ceramic widely applied in the fields of electronics,instrumentations and mechanical manufacture for its good physical and chemical properties.The ultraprecision lapping technology for the Zirconia ceramic is studied in this paper,and the influence of the different lapping parameters such as slurry,load and lapping velocity on the surface roughness of Zirconia ceramic is discussed.The evolution of surface construction is observed with the microscope to analysis the material removal mechanism.An extremely smooth surface with roughness 6.55nm Ra is obtained in the ultraprecision process.It is also found that the gap in the material will limit improvement of surface roughness and a better surface roughness of 4.72nm Ra was observed when using more compactly material lapped by same method.
Zirconia ceramic Ultraprecision lapping Surface evolution Removal mechanism Gap
Ji Hongbo Peng Yan Zhou Fenfen Guo Weigang Lv Binghai Zhao Ping
Ultra-precision Machining Research Center of Zhejiang University of Technology,Hangzhou,310014,P.R.China
国际会议
杭州
英文
129-134
2013-09-23（万方平台首次上网日期，不代表论文的发表时间）