Microstructure and corrosion properties of Mg-Zn-Ca-Zr alloy for biomedical application
The microstructures and corrosion properties of the as-cast Mg-Zn-Ca-Zr alloys were investigated in this study.The results showed that the alloy was mainly composed of α-Mg solid solution,Zr particle and the secondary phase of Ca2Mg6Zn3.The grain size of alloy specimens decreased with the increment of Zr content.The corrosion resistances were found to increase from 0.3% to 0.5% and then decrease from 0.5% to 0.7%.The Mg-4Zn-0.5Ca-0.5Zr had the best corrosion resistance in SBF solution.This was attributed to a combination of (1) the uniform and fine microstructure of alloy,(2) continuous distributions of the secondary phases,and (3) a lower volume fraction of Zr particles.
Mg-Zn-Ca-Zr alloy Zirconium(Zr) Microstructure Corrosion properties
Jiang dongmei Yu tangsheng Jiang donghua Guo liang Cao zhanyi
Department of Aircraft and Dynamic,Aviation University of Air Force,Changchun 130022,China;Key Labor Xinmin oil production plant,Jilin Oilfield,Songyuan 138000,China Key Laboratory of Automobile Materials of Ministry of Education,Jilin University,Changchun 130025,Ch
国际会议
西安
英文
403-406
2013-07-27(万方平台首次上网日期,不代表论文的发表时间)