FEM simulation of hot forging process to predict microstructure evolution
Two phase titanium alloy-TC11 alloy and Superalloy-IN718 alloy are being considered for high-temperature structural applications in aero-engine because of their excellent mechanical properties at elevated temperatures.The mechanical properties of their forgings are sensitive to the microstructure.Therefore,it is crucial to obtain a corresponding microstructure by controlling the hot working process.For the forging of TC11 alloy,the ingot break down in the subtransus region is an important process which acted as the primary role in the transformation of lamellar structure to equiaxed one as well as its poor formability because of lower deformation temperature.In this paper,the lamellar globularization kinetics and fracture behavior during forging are studied and modeled.For the hot forging of IN718 alloy.the grain size evolution is an important process.As the δ phase in the alloy can control grain growth through the strong pinning effect,the effect of δ phase on the microstructure evolution during hot working has been considered in this paper,and the microstructure evolution model has been established.As a applications,The lamellar globularization and fracture during the subtransus cogging process of large size TC11 alloy billet,and the microstructure development during the hot forging process of IN718 alloy turbine disk have been investigated commercial FE Software with user subroutines.The prediction results showed good agreement with the actual ones.
Finite Element Method Microstructure Simulation Hot Forging
Shi-Hong ZHANG Hai-Yan ZHANG Hong-Wu SONG Ming CHENG
Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China School of Mechanical Engineering,Ningbo University of Technology,Ningbo,315016,China
国际会议
沈阳
英文
262-268
2013-07-06（万方平台首次上网日期，不代表论文的发表时间）