Coupled of Thermal-Mechanical-Transformation Numerical Simulation on Hot Stamping with Static Explicit Algorithm
Thermal-mechanical-transformation coupled theoretical model for hot stamping and rheological behavior of high strength steel at elevated temperatures were obtained through non-isothermal and isothermal tensile tests respectively in this work.The static explicit finite element equations for hot stamping were proposed based on thermal-mechanical-transformation coupled constitutive laws and nonlinear,large deformation analysis.According to these equations,the hot stamping module of KMAS (King Mesh Analysis System) was developed for the numerical simulation of sheet metal forming at elevated temperatures.Afterwards,the hot stamping simulation of a typical B-pillar conducted by the KMAS software was compared to the experiment.The comparison consists of the following sides: temperature distribution,thickness distribution and martensite fraction.The good agreement between numerical simulation and the experiment confirms that the multi-field coupled constitutive laws and the KMAS software can predict hot stamping process accurately.
Hot Stamping Thermal-mechanical-transformation Coupled Constitutive Laws Static Explicit Algorithm Numerical Simulation
P.Hu D.Y.Shi L.Ying G.Z.Shen Y.Chang W.Q.Liu
School of Automotive Engineering,Faculty of Vehicle Engineering and Mechanics,State Key Laboratory o Department of Engineering Mechanics,Faculty of Vehicle Engineering and Mechanics,State Key Laborator School of Automotive Engineering,Faculty of Vehicle Engineering and Mechanics,State Key Laboratory o
国际会议
沈阳
英文
394-405
2013-07-06（万方平台首次上网日期，不代表论文的发表时间）