FEM Analysis of Partial Flash Processing for a Plate
FEM analysis of Partial Flash Processing (PFP) was carried out by ANSYS to simulate the heat treatment of wear-resistant steel plate.PFP involves rapid induction heating and water cooling to get different properties of a plate in thickness direction.The steel plate which moves at a given velocity is heated by a stationary inductor and then cooled by spraying water.The temperature filed and the difference of microstructure and properties of the plate in PFP were studied.The electromagnetic and thermal coupled problem will be solved by sequentially coupled physics analysis.The nonlinearities of both the electromagnetic and thermal material properties are also taken into account.Cooling condition will be loaded as a function of water spray position on the surface of steel plate.The FEM analysis results are compared with the measure data,and they are in good accordance.The microstructure and the depth of hardening layer prove the FEM analysis results are credible.The relationship between the temperature distribution and the processing parameters,such as induction frequency,current density etc.,were built up.The numerical analysis provides a basis for further theoretical analysis and parameter optimization of PFP.
Partial Flash Processing FEM analysis Temperature field Plate with Differentiation Properties
CHEN Qing-an LIU Xiang-hua
The State Key Laboratory of Rolling and Automation,Northeastern University,Shenyang,China
国际会议
沈阳
英文
1085-1091
2013-07-06（万方平台首次上网日期，不代表论文的发表时间）