会议专题

Study on CO2 Hydrogenation to Ethylene with Iron-based Catalyst

  Carbon dioxide hydrogenation to ethylene was investigated on Fe-Cu-K-Ce loading catalysts.These catalysts were prepared by impregnation method,and studied on the CO2 conversion and the selectivity of ethylene.The proper carrier was obtained comparing with their catalytic activity.The loading contents of active components on carriers and reaction conditions were studied.Results show that the MgO-ZSM-5 are the best carrier,the content of Fe at 15% and the molar ratio of Fe∶ Cu∶ K∶ Ce with 100∶ 20∶ 8∶8 is better under the condition of reaction temperature and reaction pressure are 623K and 1.0Mpa respectively with CO2 conversion of more than 60% and the selectivity of ethylene of more than 20%.The catalysts were characterized by CO2 temperature-programmed desorption (CO2-TPD).

Iron-based catalyst Ethylene Carrier Reaction condition CO2 hydrogenation

Chunyan Su Jianqun Tan Chengxue Wang

School of Chemical Engineering, Changchun University of Technology, Changchun, Jilin, 130012,China

国际会议

2013 3rd International Symposium on Chemical Engineering and Material Properties(2013第三届化学工程和材料性能国际研讨会)(ISCEMP 2013)

三亚

英文

731-734

2013-06-22(万方平台首次上网日期,不代表论文的发表时间)