Effect of additives on photocatalysis of Cr(Ⅵ)-methyl orange
Photocatalysis technology is an efficient chemical method for wastewater treatment containing organic and inorganic pollutants.Adding additives may affect the photocatalytic process.The photocatalytic processes of 50 mL mixed solution,40 mg/L MO-20mg/L Cr(Ⅵ),were proceeded under λ≥420,pH=l.When adding organics (such as isopropanol,methyl alcohol,alcohol,acetone),photocatalytic efficiency of MO was restrained,and that of Cr(Ⅵ) was promoted.Adding materials such as formaldehyde with both oxidizing and reducing effects could promote photocatalytic efficiency of MO and Cr(Ⅵ) at the same time.When H2O2 added into the composite system,the influence of photocatalysis is relatively complicated.Through controlled experiment,the results show that H2O2-Cr(Ⅵ) could form Fenton reagent and speed up the photocatalytic degradation of MO.When inorganic cation (such as Na+,Cu2+,Fe3+) and inorganic anion (such as Cl-,NO2-,S2O32-) added into the composite system,there is no obvious rule.Experimental study show that adding cationics make the photocatalytic reduction of Cr(Ⅵ) inhibited,and adding anion which has the reducibility could promote the photocatalytic efficiency of Cr(Ⅵ).Since NO2 and S2O32-have simple chemical reactions witch Cr(Ⅵ),photocatalytic degradation of MO under visible light also could proceed successfully.
photoeatalysis TiO2 MO Cr(Ⅵ) synergistic effect additive
Yajun Wang Lijuan Jiang Changgen Feng
State Key Laboratory of Explosion Science and Technology, Beojing Institute of Technology, Beijing 100081, China
国际会议
2013 International Symposium on Environmental Science and Technology(2013环境科学与技术国际会议)
大连
英文
501-505
2013-06-04(万方平台首次上网日期,不代表论文的发表时间)