An Experimental Investigation On The Bearing Failure Load Of Multi-Pin Joints In Composite Laminates

摘要：

　　In this paper,an experimental study has been carried out to investigate the failure load and the failure mode of multi-pin joints of glass fibre reinforced composite laminates which have the stacking sequence of 0/+45/90/0s subjected to a traction force.The laminates were manufactured by vacuum assisted resin infusion (VARI) and tested with a special fixture.The number of pins was set from 3 to 5,while there were two different arrang styles for each condition.The test results showed that the failure loads were directly affected by the number of pins and arrang styles.The ultimate failure loads increased with the number of pins.

关键词： composite multi-pin joints failure load experimental study

作者: Yongang Xie Jifeng Zhang Zizhen Cao Lu Zhang

作者单位: Smart Structures and Advanced Composites Laboratory,College of Aerospace and Civil Engineering,Harbin Engineering University,Harbin 150001,China

会议类型: 国际会议

会议名称: 2012 2nd International conference on Machinery Electronics and Control Engineering (2012年第二届国际机械电子与控制工程会议(ICMECE 2012))

会议地点: 济南

会议语种:英文

页码: 89-92

在线出版日期: 2012-12-29（万方平台首次上网日期，不代表论文的发表时间）