Study on Processing Optimization in ultrasonic-assisted grinding of SiCp/AI Thin-walled Workpiece

摘要：

　　Thin-walled workpieces have the characteristics to withstand a greater load with less material and they are used in aerospace field widely.SiCp/Al composite has high strength and stiffness,which meets the requirements of the aerospace workpieces well.The optimization method is studied with grinding stability and material removal rate as constraint conditions in this paper.The processing parameters optimization of a SiCp/Al thin-walled cylinder is analyzed according to stability lobe diagram.The grinding parameters optimization could be achieved by this method and the chatter could be prevented effectively.

关键词： Thin-walled workpiece SiCp/Al composite processing optimization stability lobe diagram

作者: Ming Wang Ming Zhou

作者单位: School of Mechanical and Electrical Engineering,Harbin Institute of Technology,Harbin 150001,P.R.of School of Mechanical and Electrical Engineering,Harbin Institute of Technology,Harbin 150001,P.R.of

会议类型: 国际会议

会议名称: 2012 2nd International conference on Machinery Electronics and Control Engineering (2012年第二届国际机械电子与控制工程会议(ICMECE 2012))

会议地点: 济南

会议语种:英文

页码: 673-676

在线出版日期: 2012-12-29（万方平台首次上网日期，不代表论文的发表时间）