FEM simulation of weld quality of AA6063 aluminium alloy profiles during Continuous Extrusion process with double feedstocks
In this study,a FE simulation model of the continuous extrusion process with double feedstocks is established.It is aimed to investigate the weld quality of AA6063 aluminium alloy profiles.The results show that with the height of preformed die increasing,the pressure-to-effective stress ratio (K) increases greatly and the welds can be improved.The maximum value of K reaches to 5.5.By observation the microstructure of the welding zone,the extrusion welding line does not extend to the product surface.No defects appeared on the surface of the extruded product.It is proved that the AA6063 product with good welding quality can be obtained by continuous extrusion with double feedstocks.These also provide the theoretical basis for expanding the application of the continuous extrusion process with double feedstocks.
continuous extrusion double feedstocks weld quality AA6063 aluminium alloy FEM
Ying Zhao Baoyun Song Jiuyang Pei Chunbo Jia Bing Li Linlin Guo
Engineering Research Center of Continuous Extrusion, Ministry of Education Dalian Jiaotong University, Dalian 116028, China
国际会议
厦门
英文
427-431
2012-12-28（万方平台首次上网日期，不代表论文的发表时间）