会议专题

Microstructure and magnetic properties of Fe-Si-Al soft magnetic composite

  In this paper,the Fe-9Si-6Al soft magnetic composite has been prepared via powder particles coated with aluminum oxide and silicone.The magnetic properties and microstructure of Fe-Si-Al SMC has been investigated.Results showed that the powder particles surface contained a thin insulating layer made of aluminum oxide and silicone.After annealed at 800℃ for 60min,the particles of component are all by themselves and the insulating layer is not destroyed.The Fe-Si-Al SMC has excellent magnetic properties.The magnetic permeability is steady with the frequency changing at 5kHz-100kHz range.

Soft magnetic composite Fe-Si-Al alloy Microstructure Magnetic properties

Yuandong Peng Jian Ma Wenjun Zhang Chongxi Bao Junwu Nie Jianming Ruan

State Key Laboratory of Powder Metallurgy, Central South University, Changsha,410083,P.R.China;NBTM NBTM New Materials Group Co.LTD., Ningbo,315191,P.R.China State Key Laboratory of Powder Metallurgy, Central South University, Changsha,410083,P.R.China

国际会议

2nd International Conference on Advanced Materials and Engineering Materials(第二届先进材料与工程材料国际会议)(ICAMEM2012)

北京

英文

7-10

2012-12-16(万方平台首次上网日期,不代表论文的发表时间)