Jitter Transmission Analysis and Experimental Research for Frame Structure in the Median and High Frequency Regions
Frame structure is widely used in practical projects.For jitter of the frame structure excited by median and high frequency disturbances,firstly,the dynamic model of thin plate substructure is built by wave method,and then the dynamic model of frame structure is established by combining wave method and substructure technique.At last,the accurate dynamic response was obtained.The simulation of dynamic characteristic is made,and simulation results are compared with FEM results.On this basis,modal experiment and frequency response experiment is done to verify theoretical results.In comparison to FEM,the results by wave method are accurate in low frequency regions,and the results are more accurate in the median and high frequency regions.The experiment proves wave method is correct and effective for jitter transmission analysis of frame structure in the median and high frequency regions.
Frame structure Wave method Median and high frequency Jitter transmission analysis Experimental research
WANG Youyi ZHAO Yang MAWenlai
School of Astronautics, Harbin Institute of Technology, Harbin, China 150001
国际会议
香港
英文
981-985
2012-12-11（万方平台首次上网日期，不代表论文的发表时间）