Study on Dynamic Contacting Nature of Cylinder-plane Friction Couple in the Condition of Rolling-Sliding
High stress is caused by sliding in the process of the line-contact has a great influence on its service life.Through establishing a finite element 3D model of the cylinder-plane friction couple for dynamic contact,ANSYS/LS-DYNA is used to analyze the friction pairs stress in the condition of rolling-sliding.The stress state of the friction is compared in the condition of five different slide-roll ratios by numerical simulation.The results show that the frictions stress in the dynamic condition of rolling-sliding is rather bigger than in the static condition.Comparing the average value and the maximum value of the yon mises and shear stresses in five different slid-roll ratios situations,it can be found that the values of max and average both first increased then decreased with increasing of the slide-roll ratio and the maximum values both appeared at the slide-roll ratio of 0.1.Methods and conclusions can provide some references for the research of the line friction pairs dynamic contacting nature in the condition of rolling-sliding and the prediction of the friction pairs service life.
Cylinder-plane friction couple Finite element Explicit dynamic slide-roll ratio
Baohong Tong Xinming Cheng Xiaoqian Sun
School of Mechanical Engineering, Anhui University of Technology, Maanshan,Anhui,243032,China
国际会议
香港
英文
1142-1146
2012-12-11（万方平台首次上网日期，不代表论文的发表时间）