The Effect of Vortex Tube Air Cooling on Surface Roughness and Power Consumption in Dry Turning
This paper presents a study of the effect of Ranque-Hilsch vortex tube air cooling on surface roughness quality and power consumption when turning mild steel material with coated carbide cutting tool.The cutting parameters involved in this study were cutting speed,feed rate and depth of cut.The cutting speed and feed rate were fixed at 160 m/min and 0.28 mm/rev,while the depth of cut was varied from 1.0 to 4.0 mm.During the turning process,the cutting temperatures were measured using an infrared thermometer and the power consumption was measured using a power and harmonics analyzer.The machined parts surface roughnesses were measured using a surface roughness tester.The results show that cooling using the Ranque-Hilsch vortex tube air cooling reduces the cutting temperature and the power consumption,but the surface roughness results is better when cooling with environment air.
Turning Surface roughness Power consumption Dry machining
Hadi Abdul Salaam Phoon Sin Ye Zahari Taha Tuan Muhammad Yusoff Shah Tuan Ya
Faculty of Mechanical Engineering Faculty of Manufacturing Engineering Universiti Malaysia Pahang, 26600, Pekan, Pahang, Malaysia
国际会议
石家庄
英文
348-351
2012-10-26（万方平台首次上网日期，不代表论文的发表时间）