Comparison of Stayed-Cable Tension of XinBei Bridge by FBG Strain Gauge installed using Adhesive and EM tension sensor
In this research we are investigating the tension in stayed cable of XinBei bridge,which located at Highway No.64 of SanZhong district,this cable stayed bridge has one pylon and symmetrically spreading cable stayed bridge which support bridge deck totaling 400 meters,200 meters at each side of the pylon,along the dike / embankment of SanZhong area.In this research we record and measure stayed-cable tension force by means of adhesive (instead of traditional method by welding) installed FBG (Fiber Bragg Grating) strain gauge as well as EM tension sensor.We also take into account the temperature effect on the measurement.We compared the result from experiment using these two different methods,and provide conclusion on each method about their how they perform as well as their accuracy.We hope that our experiment work can be beneficial for future adhesive installed strain gauge reading and tension monitoring work.
Fiber Bragg Grating adhesive installed strain gauge adhesive reagents UV light hot point
Chih-Kun Chu Qi-Wei Zhang Min-Jian Huang Che-Way Chang Jin-Hua Huang Chen-Hua Lin Jeremy Alva
Graduate Institute of Civil Engineering,ChungHua University,Taiwan Construction and Planning Agency,Ministry of Interior,Taiwan Department of Construction Engineering,National Taiwan University of Science and Technology Taiwan Department of Civil Engineering,ChungHua University,Taiwan Graduate Institute of Civil Engineering,National Taiwan University,Taiwan
国际会议
西安
英文
1-13
2012-10-01（万方平台首次上网日期，不代表论文的发表时间）