Method of Projectile Spinning Rate Processing Based on Acceleration Compensation
Slotting at the base of spin-stabilized projectile is widely used in spinning rate measurement.Confined by the structure of the base,it only suits few models of projectile.For the projectiles with special structures,such as apertures or holes at the base,the information of spinning rate in radar echo is considerably so weak that the conventional signal processing methods become invalid.Herein,a method based on acceleration compensation is proposed to extract the spinning rate from the echo of low signal to noise rate (SNR).First,an algorithm called Two Segments based FFT is adopted to estimate the coarse rate of linear frequency modulation (LFM).Next,using the coarse rate as the initial value of optimization,Golden Section method is used to search the fine rate of LFM to improve the accuracy of estimation.Then,the fine value is used to construct the reference LFM signal and compensate the effect of acceleration.At last,based on Chirp Z Transform,the method of spectrum zooming is employed to alleviate the spectrum leakage and improve the performance of spinning rate processing.Simulation shows that the precision of the spinning rate measurement is better than 0.25% for majority of the modulation indices when the SNR equals to 0 dB.
projectile spinning rate acceleration compensation LFM dechirp
Ruoyu ZHANG Yuanqin WANG Jing SUN
Beijing Institute of Tracking and Telecommunications Technology, Beijing 100094, China;Academy of Eq Academy of Equipment, Beijing 102249, China Beijing Aerospace Control Center, Beijing 100094, China
国际会议
2012第八届精密工程测量和仪器仪表国际研讨会(ISPEMI2012)
成都
英文
1-7
2012-08-08（万方平台首次上网日期，不代表论文的发表时间）