会议专题

Microstructure Effects on Corrosion Behavior of Mg-Zn-Zr-Nd ZM6 magnesium Alloy

  The effect of microconstituents on the corrosion and electrochemical behavior of Mg-Zn-Zr-Nd ZM6 magnesium alloy prepared by die-casting and ingot casting route has been investigated in 3.5Wt%NaCl solution.The experimental techniques used include long term immersion test and potentiodynamic polarization experiments.Surface examination and analytical studies were carried out using opticai(OM) and scanning electron microscopy(SEM) and X-ray diffraction(XRD).Die-cast ZM6 magnesium alloy with smaller grain size offered marginally lower corrosion rate.In die-cast and ingot,corrosion attack took place preferentially on α-Mg phase.XRD patterns of non-corroded surface revealed α-Mg and Mg12Nd phases.The corrosion products for ZM6 ingot consisted of Mg(OH)2 together with α-Mg and Mg12Nd phases.The corrosion resistance of ingot is higher than diecast sample.

Magnesium alloys ZM6 Ingot Die-cast Microstructure Corrosion

CHEN Chang-jun ZHANG Min FEI Qunxing

School of Mechanical and Electrical Engineering, Laser Processing Research Center, Soochow Universit Department of Inorganic Nonmetallic Materials, School of Materials Science and Engineering, Universi

国际会议

2012 2nd International Symposium on Chemical Engineering and Material Properties(ISCEMP2012)(2012第二届化学工程与材料特性国际研讨会)

太原

英文

695-698

2012-06-23(万方平台首次上网日期,不代表论文的发表时间)