Test methods for suspended load abrasion and bed load abrasion on hydraulic concrete
The machanisms of suspended load abrasion and bed load abrasion are different,but they are not distinguished in the current test methods to evaluate the abrasion resistance of concrete.The abrasion resistance to bed load can be tested by underwater method,and to bed load can be tested by ring speciman method.To study the influence of mixture parameters of concrete to these two machanisms,concretes with different aggregates,different dosage of fly ash and different strength grade were tested by high speed underwater method and high speed ring speciman method.The results showed that the amount of cementing materials and the types of fine aggregate had a significant effect on the high-speed ring specimen method,but it wasnt affected by the class of strength,so this method only reflected the abrasion resistance of the outer concrete and was easily influenced by the quality of concrete surface; high-speed underwater method was just only related to the types of aggregate,and had little effect on the rest,so it could reflect the abrasion resistance of the inner concrete without caring about the quality of concrete surface.Therefore,choosing different test methods for evaluating the abrasion resistance of concrete should be based on the actual condition in the projects.
suspended load abrasion bed load abrasion High-speed ring specimen method High-speed underwater method
Pin DAI Jian-tong DING Yin BAI
College of Mechanics and Materials, Hohai University, Nanjing 210098, China State key Laboratory of Hydrology-water Resources and Hydraulic Engineering, Nanjing Hydraulic Resea
国际会议
杭州
英文
370-375
2012-03-23（万方平台首次上网日期，不代表论文的发表时间）