ANALYSIS OF FRACTURES IN DRIED CERAMICS SATURATED WITH SURFACTANT SOLUTIONS
Main goal of this work was to investigate the effect of surfactants on reduction of material fracture during intensive drying of clay-like materials.The dodecyl sulfate sodium salt (SDS) and the fluoric (FC 4430) surfactants were mixed with different amount of distilled water and used for wetting the clay before forming the samples.The acoustic emission (AE) method was applied to monitor on line the development of crack formation in dried material.It was stated that application of surfactants in a prescribed amount may significantly reduce the drying induced stresses and fractures of the material during intensive drying and in this way to improve the quality of dried products.
drying ceramics fractures acoustic emission surfactants fracture reduction
S.J.Kowalski K.Kulczyński
Poznań University of Technology,Institute of Technology and Chemical Engineering Department of Process Engineering,pl.Marii Sklodowskiej Curie 2,60-965 Poznań,Poland
国际会议
The 18th International Drying Symposium Conference(第十八届国际干燥学术大会(IDS2012))
厦门
英文
1-7
2012-01-11(万方平台首次上网日期,不代表论文的发表时间)