EXPERIMENTS STUDY ON THE SEISMIC BEHAVIOR OF SLITTED SHEAR WALL STRUCTURE WITH PERMANENT THERMAL-INSULATION WALL FORM UNDER THE LOW CYCLIC LOAD
The slitted shear wall structure system with permanent thermal-insulation wall form of glazed hollow beads is a new structure with thermal-insulation function in order to adapt the need of energy-saving building.As for structural character,this structure is a slitted shear wall structure,which can change the failure mode of shear walls and realize the seismic structural control.The experiments of slitted shear wall and common shear wall with different shear span ratio were carried out under low cyclic loading.The failure modes,bearing capacity,hysteretic curve,lateral stiffness and ductility of two kinds of structures were compared and analyzed.The results showed that under the vertical and cyclic loading,the lateral stiffness of slitted shear wall was 25%-35% lower than that of the common shear wall structure,whereas the stiffness degradation coefficient from yielding to failure,βuy,increased.Meanwhile,the slitted shear wall structures hysteresis loops were plumper,and the energy dissipation of slitted shear wall were 1.6-1.7 times than that of the common shear wall,which showed its better energy dissipation capacity.Compared with the common shear wall,the seismic performance of the slitted shear wall was significantly improved,and the ductility coefficient increased more than 40%.As for the failure modes,the slitted shear wall had separate crack-developing zone,not so severe as the common wall.The permanent wall form had certain reinforcing action to the shear wall,which made the wall breakage with prolonged time.
Slitted shear wall structure failure mode ductility stiffness energy dissipation
Yuanzhen Liu Zhu Li Shangsong Qin Li Xu
College of Architecture and Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, P.R.China
国际会议
The Twelfth International Symposium on Structural Engineering (第十二届结构工程国际研讨会)
武汉
英文
1229-1234
2012-11-17（万方平台首次上网日期，不代表论文的发表时间）