Developing A Mathematical Model for Hydrate Formation in A Spray Batch Reactor
The formation of methane hydrate was undertaken in this research.The purpose of this work was to model the methane hydrate formation with a hydrate-water-methane system in a semi-batch reactor under steady-state,isothermal and isobaric conditions.Obtained results were validated with experiments conducted in a semi-batch spray reactor at low temperatures and high pressures.The investigated formation of gas hydrate from pure methane required physical constants of these materials which were determined through experimental data.The experiments hence,the theoretical calculations were conducted with pure methane and carried out in a spray reactor at 273.95K and 8705kPa to determine the actual amount of hydrate formation in such reactor.Ultimately; the comparison of the results generated from the developed mathematical model with those of experimental data of others indicated a very satisfactory agreement obtained.
hydrate formation methane spray reactor semi-batch modeling
Mohammad Kazemeini Farideh Freidoonian Moslem Fattahi
Department of Chemical and Petroleum Engineering, Sharif University of Technology, P.O.Box 11365-946 Islamic Azad University, South Tehran Branch,Tehran, Iran
国际会议
北京
英文
244-248
2012-10-26（万方平台首次上网日期，不代表论文的发表时间）