New solid state phosphate sensitive electrodes for routine environmental monitoring
Highly selective and sensitive phosphate sensors have been fabricated by constructing a solid membrane disk consisting of variable mixtures of aluminium powder (Al),aluminium phosphate (AIPO4) and powdered copper (Cu).Both binary and ternary electrode systems are produced.The ternary membranes exhibit greater selectivity over a wide range of concentrations.The ternary electrode with the composition 25% AlPO4,25% Cu and 50% Al was selected as our preferred electrode.The newly fabricated ternary membrane phosphate selective electrodes exhibited linear potential response in the concentration range of 1.0 × 10-1 to 1.0 × 10-6 mol L-1.The electrodes also exhibit a fast response time of<60 s.Their detection limit is lower than 1.0 × 10-6 mol L-1.The unique feature of the described electrodes is their ability to maintain a steady and reproducible response in the absence of an ionic strength control.The electrodes have a long lifetime and can be stored in air when not in use.
Phosphate selective electrodes selectivity coefficient ionic strength inorganic phosphate, environmental monitoring
Fikru Tafesse
Chemistry department, University of South Africa,UNISA, Pretoria, South Africa
国际会议
北京
英文
128-131
2012-10-26（万方平台首次上网日期，不代表论文的发表时间）