Decoupling control of secondary regulation loading system
The simulation loading system with secondary regulation contains hydraulic coupling and mechanical coupling.This study analyzed the influence on the performance of the system caused by coupling disturbances.Control performance under coupling disturbances with PID control was simulated by MATLAB.With the increasing of the pressure fluctuations,fluctuations of torque control and speed control system all changed.The influence of torque control system is greater than speed control system.When the torque fluctuated,the drive speed appeared large fluctuation error and the error was direct ratio to the torque fluctuation.But the torque system is immune to the speed fluctuation.In order to eliminate the influences,a decoupling controller has been designed.Control performances under the disturbance of hydraulic and mechanical coupling with decoupling controller and without decoupling controller were simulated.The results showed that,when added decoupling components,the system was decoupled,the negative influence of the coupling interferences to the system was reduced or eliminated,the control property was improved.
load simulation system secondary regulation coupling disturbance decoupling control
WangJie WangHui ShiMeng
College of Mechanical Engineering, Liaoning Technical University, Fuxin, Liaoning, 123000, China
国际会议
辽宁葫芦岛
英文
443-446
2012-08-07（万方平台首次上网日期，不代表论文的发表时间）