Research on Preparation and Properties of Al-Mn Alloy Coating inNaCl-KCl-AlCl3-NdCl3 molten salts

摘要：

　　Al-Mn alloy coatings were electrodeposited on an iron substrate from AlC13-NaCl-KCl low-temperature molten salts with anhydrous MnC12 enhanced by the addition of NdC13.The microstructure and properties of the Al-Mn alloy coatings were investigated,and scanning electron microscopy,X-ray diffraction,and polarization curves were used to determine the composition,surface morphology,phase structure,and corrosion resistance of the obtained deposits.The results show that the surface coatings were smooth,and that the crystallites were dense and uniform when 0.23 wt% NdC13 was added to the molten salt.An amorphous mixture of Al and Al6Mn was obtained.NdC13 enhanced the corrosion resistance and increased the hardness of the single amorphous phase alloys.The pitting potential of the coating was approximately-1.04V,and its hardness was 392 kgf/mm2.

关键词： Al-Mn alloy coatings low temperature molten salt properties

作者: Xianjin Yu Lipeng Zhang Zhiwei Ge Yunhui Dong Danggang Li Hanbing Liang

作者单位: School of Chemical Engineering, Shandong University of Technology, Zibo,China 255049

会议类型: 国际会议

会议名称: the Second International Conference on Frontiers of Manufacturing and Design Science(第二届制造与设计科学国际会议(ICFMD 2011))

会议地点: 台湾

会议语种:英文

页码: 335-339

在线出版日期: 2011-12-11（万方平台首次上网日期，不代表论文的发表时间）